Display Type

Origin	Republic of Korea
Model Number	NSP-300-2ch

Product

Our NSP-300-2CH model is used as an electronic room mirror(ECM) attached vehicle, and no room mirror or large vehicle.
The "SAFETYeye" prevents accidents and collisions, when backing up a car, allowing the driver to observe areas behind the vehicle, which can otherwise not be monitored. This safety system allows backing up safely, it also alarms and indicates the distance between an obstacle and the vehicle at the same time.

Operating Methods

The "SAFETYeye" is turned on when shifting into reverse, displaying ≡.≡on the distance indicator display installed on the dashboard.
When sensing an obstacle within a 1.6m radius, an audible alarm tone starts. When the vehicle moves closer to the obstacle, the display shows the distance between the car and the obstacle in steps of 0.1 m, and the alarm tone changes. When the distance is below 0.4 m, the display shows "n.0" and the alarm sounds continuously. Indicator lights on the sides of the display inform the driver of the location of any obstacle.

Features

• Obstacle sensor at backs of vehicle for safe reversing
  
• Maintain safe distance in bad weather
  
• Maintain safe distance from an obstacle for parking or stopping
  
• Easy to install and semi-permanent
  
• Harmonious design blends in with vehicle (stick-on type sensor)
  
• Indicates distance between vehicle and an obstacle in steps of 0.1 m
  
• Displays right or left position of obstacle
  
• Four-step alarm in proportion to the distance between vehicle and obstacle

• Detection: Ultrasonic sensor 4ch (SIZE 24mm)
  
• Input power: 12V OR 24V DC
  
• Operating temperature: -20°c ~ +65°c (-4F~ +140F)
  
• Length of display cable: 7m (21.5FT)
  
• Length of detector cable: 3m (9.5FT)
  
• Length of power wire: 3m (9.5FT)
  
• Control box size: 95mm x 72mm x 18mm
  
• Display size: 55mm x 62mm x 26mm
  
• Weight: 800g