Real View Mirror Type

Model Number

NSP-600

Product

Our NSP-600 model features a built-in distance indicator in a rear mirror, which indicates the distance to an object directly in the mirror, allowing the driver to back up the vehicle without turning his head. The stick on type sensor allows the driver to DIY.
The "SAFETYeye" prevents accidents and collisions, when backing up a car, allowing the driver to observe areas behind the vehicle, which can otherwise not be monitored. This safety system allows backing up safely, it also alarms and indicates the distance between an obstacle and the vehicle in the back mirror at the same time.

Operating Methods

The "SAFETYeye" is turned on when shifting into reverse, displaying ≡.≡on the distance indicator display installed on the dashboard.
When sensing an obstacle within a 1.6m radius, an audible alarm tone starts. When the vehicle moves closer to the obstacle, the display shows the distance between the car and the obstacle in steps of 0.1 m, and the alarm tone changes. When the distance is below 0.4 m, the display shows "n.0" and the alarm sounds continuously. Indicator lights on the sides of the display inform the driver of the location of any obstacle.

Features

• Obstacle sensor at the backside of a vehicle, for safe driving in reverse
• Maintain safety distance in bad weather conditions
• Maintain safety distance from an obstacle when parking or stopping
• Easy to install and semi-permanent
• Harmonious design blends in with vehicle (stick-on type sensor).
• Indicates distance between vehicle and an obstacle in steps of 0.1 m
• Displays right or left position of obstacle
• Four-step alarm in proportion to the distance between vehicle and obstacle

• Detection: ultrasonic sensor
• Input power: 12V or 24V free volts DC
• Operating temperature: -20° ~ +65°
• Length of display cable: 7m(21.5FT)
• Length of detector cable: 3m(9.5FT)
• Length of power wire: 3m(9.5FT)
• Control box size: 55mm x90mm x22mm
• Display size: 285mm x 80mm x 10mm
• Weight: 1.2kg